1、 Product Introduction:< The cold and hot shock testing machine is used to test the degree to which material structures or composite materials can withstand continuous environments of extremely High and low temperatures in an instant. It can test the chemical changes or physical damage caused by thermal expansion and contraction in a short period of time. The applicable objects include materials such as metal, plastic, rubber, electronics, etc., which can be used as a basis or reference for product improvement< The three box equipment is divided into three parts: high temperature zone, low temperature zone, and testing zone. The test product is placed in the testing zone, and the temperature of the high or low temperature zone is flushed into the testing zone for impact. The test product is static.

Adopting a touch based graphical control interface, the operation tube is easy to operate.

The impact method applies the air path switching method to import the temperature into the testing area for conducting cold and hot impact tests< br/> During high or low temperature impact, the maximum time can reach 999H and the maximum cycle period can reach 9999 times.

The system can be used for automatic cycling or manual selective impact, and can set the start of second or third zone impact and cold and hot impact.

The cooling system adopts a binary freezing system, which has a fast cooling effect and is water-cooled< br/>

2、 Implement standards and test methods that meet the requirements:& nbsp;

1. GJB150.5 temperature shock test;

2. GJB360.7 temperature shock test;

3. GB/2423.22 Temperature Shock Test

III. Specification and Model:

Model WS-CJ-42 (A~C) WS-CJ-80 (A~C) WS-CJ-150 (A~C) WS-CJ-252 (A~C) WS-CJ-450 (A~C)

Internal dimensions WxHxD (cm) 40X35X30 50X40X40 60X50X50 70X60X60 80X75X75

External dimensions WxHxD (cm) 140x180x145 148X190X155 160x200X175 175x210X187 190x220x200

Temperature range (150 ℃~A:- 45℃； B：-55℃； C：- 65℃)； (High temperature zone:+60 ℃~+150 ℃; Low temperature zone:- 10℃~-65℃；)

Heating time (heat storage area) RT~200 ℃ takes about 35 minutes

Cooling time (cold storage zone) RT~-70 ℃ takes about 85 minutes

Temperature recovery time/conversion time ≤ 5 minutes/≤ 10 seconds

Temperature control accuracy/distribution accuracy ± 0.5 ℃/± 2.0 ℃

The internal and external materials of the machine are all SUS 304 # stainless steel plate with matte treatment, and the inner box is made of stainless steel

Thermal insulation material High temperature resistant and high-density vinyl chloride acetate foam insulation material

System P I. D+S.R+microcomputer balanced temperature control system

Cooling system semi closed two-stage compressor (water-cooled)/fully closed two-stage compressor (air-cooled)

Safety protection device without fuse switch, compressor high and low pressure protection switch, refrigerant high pressure protection switch, fault warning system, electronic alarm

Accessory observation window (special optional type), two adjustable upper and lower compartments, power line holes, casters, horizontal bracket

Power supply AC380V 50HZ/60HZ 3 ∧

Weight (approximately) 700Kg, 900Kg, 1200Kg, 1400Kg, 1900Kg

Controller South Korea TEMI or Japan's OYO Brand Optional

Compressor France "Tecumseh" Brand